91无码人妻精品一区二区三区在线_美女午夜福利视频在线观看_中文字幕第一页亚洲第一_色牛牛五月天激情_九九性爱一区二区

<center id="96dl8"></center>
<big id="96dl8"><acronym id="96dl8"><li id="96dl8"></li></acronym></big>
    • <mark id="96dl8"><acronym id="96dl8"><li id="96dl8"></li></acronym></mark>
        National Order Hotline0577-86087966

        Air compressor maintenance of common sense

        The daily maintenance of the air compressor service life and maintenance cost has great influence, some basic daily maintenance knowledge summarized as follows:

        1, daily or every time before the operation:

        (1) oil and gas barrel drain

        (2) check the oil level

        (3) peripheral equipment preparation, such as the water to power, open the outlet valve of compressor

        2, 500 hours of operation:

        (1) the air filter removes for cleaning, with 0.2MPa under low pressure compressed air from the inside to the outside blowing.

        (2) the new machine to use after the first oil filter.

        (3) replace the cooling fluid.

        (4) filter clean air filter cup;

        (5) clean drain valve filter.

        3, 1000 hours of operation:

        (1) check the intake valve action and activity sites, and add oil. (2) the clean air filter.

        (3) examine the pipe joint fastening bolts and screw fastening wire terminal.

        4, running 2000 hours or 6 months

        (1) examine every part of pipeline

        (2) to replace the air filter element

        (3) the replacement of oil filter

        (4) the replacement of the filter element of air filter cup

        (5) the replacement of automatic drain valve filter

        (6) the supplementary motor grease

        5, 3000 hours of operation or a year:

        (1) check the intake valve action and the valve plate is closed tight.

        (2) check valve all.

        (3) check the differential pressure switch is normal action protection.

        (4) replace the oil separator.

        (5) check the pressure maintaining valve.

        (6) cooler, replace o-rings.

        (7) to replace the air filter, oil filter.

        (8) check the starter action.

        6, every 6000 hours:

        (1) cleaning road system coolant

        (2) replace the screw air compressor high coolant (exhaust gas temperature in the replacement cycle of 85 degrees below).

        7, every 20000 hours or 4 years:

        (1) the replacement of bearings, the oil seal body, adjust the gap.

        (2) measure the insulation of the motor should be more than 1M Omega.


        Wenzhou Gude Printing Machinery Co., Ltd. 2018-2023 all rights reserved
        Tel: 0577-86087966 Http://www.aiwwm.cn

        Mobile Site

        Mobile Site